Stability test 2

Ok, so this is our second test – using a more manageable gear factor of 576 (24 ^ 2), and with some increased speed on the motor.  Unfortunately, we’ve got some issues here:

  1. Our software is not resetting the rig back to the same position
  2. The motion is more inconsistent between passes (than the last test)
  3. The camera looks like it’s shifted a bit (could be focal length, could be focus) in the first frame – we’ll need to lock it down a bit more for the next tests.

Below you see two passes that have edge detection applied screened together.  The jitter you see (where the red and green jump around each other) represents the motion instability.


1 Response to “Stability test 2”

Leave a Reply